Инструкция toshiba e-studio 163

инструкция toshiba e-studio 163
Page 110: Specifications Of Options Acceptable paper size Paper weight Maximum capacity Dimensions Weight TOSHIBA-recommended paper is used for the values above. Popular Products Top Toshiba Office Equipment & Supplies Experts pkwc Level 2 Expert 254 Answers Are you a Toshiba Office Equipment and Supply Expert? Page 103: Cleaning Charger, Close The Front Cover Cleaning charger If the inside of the charger is dirty, staining may appear on the copied image. While pushing the green knob of the side guides fully, widen the gap between them. Page 33: Preparation 2 — Placing Copy Paper, Acceptable Media Types *3 Be sure to use the overhead transparencies that TOSHIBA recommends.


Check the position and release the jammed paper. Developer sleeve Fig. 3-34 Confirm that the side seals are attached on the toner scattering prevention sheet. Press the [COPY] button several times until the lamp of the desired paper size is lit. e.g.) Selecting A4 size You can select the desired paper size with the [DRAWER] button in the same procedure. Paper Jams… Page 89: Paper Jams Within Fuser Unit Paper jams within fuser unit Be careful not to let your fingers be caught between the equipment and the side cover. The copy image has white streaks in a horizontal direc- tion.

Insert the toner cartridge until you hear a click sound. Clean the transfer charger wire following the procedure below. The equipment is quite heavy and weighs approximately 32 kg (70.55 lb), therefore pay full atten- tion when handling it. Press the APS/AMS selecting button until the AMS lamp is lit.

Похожие записи: